SpiderBot Delta 3D Printer

Rubber pads for underneath the printer

posted in Customisations
Friday, October 11 2013, 09:47 PM
You can't put the printer as it is on nice furniture as the bottom will scratch furniture so some rubber support points underneath would be nice.
    Responses (12)
    • Accepted Answer

      Friday, October 11 2013, 09:49 PM - #permalink
      Ok, good suggestion, we will think on it.
      The reply is currently minimized Show
    • Accepted Answer

      Friday, October 11 2013, 09:49 PM - #permalink
      I was also looking for that!
      The reply is currently minimized Show
    • Accepted Answer

      Friday, October 11 2013, 09:50 PM - #permalink
      I put some pieces from a box underneath and was considering printing some supports. But I agree, this would be a nice improvement / addition!
      The reply is currently minimized Show
    • Accepted Answer

      Friday, October 11 2013, 09:50 PM - #permalink
      Maybe something like this. You could push and glue it in the bottom of the Igus rail.

      http://i.imgur.com/rYfh6p9.jpg?1
      The reply is currently minimized Show
    • Accepted Answer

      Friday, October 11 2013, 09:51 PM - #permalink
      The reply is currently minimized Show
    • Accepted Answer

      Monday, October 14 2013, 12:55 AM - #permalink
      STL file for base pad I designed for my Spiderbot
      The reply is currently minimized Show
    • Accepted Answer

      Alex
      Alex
      Offline
      Tuesday, October 22 2013, 09:23 PM - #permalink
      This is just what I was thinking. Good idea to print your own feet too!
      The reply is currently minimized Show
    • Accepted Answer

      Saturday, November 16 2013, 06:52 PM - #permalink
      Here are the original.

      http://www.igus.nl/wpck/7772/dryLin_N_Endkappen?C=NL&L=nl
      Attachments:
      The reply is currently minimized Show
    • Accepted Answer

      Saturday, November 16 2013, 08:03 PM - #permalink
      Owh.. I like those. :)

      Wonder what they cost, the only offer them to companies...
      The reply is currently minimized Show
    • Accepted Answer

      Sunday, October 19 2014, 05:33 PM - #permalink
      Karibau wrote:

      STL file for base pad I designed for my Spiderbot

      Here I was, happy as a ducky with my new printer, and thought - wow this things needs some feet. After I designed my feet, and as I was getting ready to upload them, I thought of ... maybe someone already has made them?. OK, I could have saved myself the trouble of the design.

      Here is my foot design. The fit is quite tight (so they do not fall off) you may need to scrape and widen the opening at the top just a tiny amount.
      +---+
      | M |
      +---+
      The reply is currently minimized Show
    • Accepted Answer

      Wednesday, October 22 2014, 10:47 PM - #permalink
      Thanks for sharing! Actually the 3 sliders holding the SpiderBot have changed along the way so the old foot stl would not work with that. :)
      The reply is currently minimized Show
    • Accepted Answer

      Saturday, October 25 2014, 12:22 PM - #permalink
      And this is how they are attached (attached picture). They are also on Thingiverse
      Attachments:
      +---+
      | M |
      +---+
      The reply is currently minimized Show
    Your Reply